Our last new products  

Pneumatic push-in fittings, couplings, pneumatic cylinders, valves, blowguns, hose reels, non-return valves, tanks, pressure gauges, piping systems and a lot a of other products of industrial pneumatics.

 

AISI 316L series 1663 stainless steel pilot operated check valves, when fitted in pairs to the supply ports of a cylinder, allow rapid blocking of rod movement in the event of a sudden drop in pressure...

 Stainless steel pilot operated non-return valve

View more...


Compressed air receivers (sometimes also called "tanks") are essential mechanisms in a compressed air network. They are generally positioned at the compressor outlet to store large volumes of pressurised air. By acting as a real buffer between the compressor and the points of use, they make it possible to absorb peaks in compressed air consumption (fluctuating air flow) and to ensure continuous operation of the installation, even under fluctuating conditions of use...

Compressed air tanks - SENGA

 

View more...


Pneumatic hose reels are fixed or transportable devices that can easily and automatically wind and unwind a hose that can carry fluids such as compressed air and cold water...

 

Hose reels - SENGA

 

View more...


The air blowgun is a gun that blows air under pressure and usually consists of a nozzle, a handle and a trigger. The blowgun is used in many sectors (mechanics, garage, DIY, industry) and especially in manufacturing and maintenance activities...

 

Compressed air blowguns - SENGA

 

View more...


Valves are mechanical devices that control, and more specifically open, close or regulate the flow of a liquid or gaseous medium in a pipeline. There are many different types of valves including: ball valves, needle valves, diaphragm valves, rotary lever valves, angle seat valves, flap valves and many others...

 

Pneumatic ball and needle valves

 

View more...


Pneumatic cylinders (also called pneumatic actuators) are products used to provide linear or rotary motion and force to automated systems such as machines and processes in industrial applications...


Pneumatic cylinders - SENGA

 

View more...


5th May:2022

SENGA hose clamps

Clamps are metal (or plastic) components used to hold pipes and cables. They are used in many areas such as industry, garages, automotive, plumbing etc...

 

Hose clamps - SENGA

 

View more...


In industrial pneumatics, a pneumatic fitting or pneumatic connector is a mechanical link that allows the passage of a fluid (compressed air, vacuum, gas, water, oil, etc.) without leakage within a circuit....

 

Pneumatic fittings - SENGA

 

View more...


We have added a brand new series of miniature pneumatic push-in fittings in AISI 316L stainless steel to our range. The special feature of this new 5950 series (compared to the usual 5800X series) is its reduced overall dimensions. Designed for applications in the chemical and food industries, our 5950 series fittings have a vacuum resistance of -0.99 bar and a pressure resistance of up to 18 bar...

 

Push-in fittings in stainless steel

 

View more...


SENGA is pleased to announce the immediate availability of Ø20 (for downpipes) for the SENfluid compressed air piping system. This development reflects our will to complete our SENfluid range and to propose to our customers a technical solution to realize their downpipes of compressed air piping system in diameter 20 (mm)...

 

Compressed air piping system - SENfluid

 

View more...


Our new anti-scratch blowgun for compressed air has been designed to meet the growing demands of the market. Today we are proud to present a European patented product combining reliability, performance, design and excellent value for money. This blowgun is made of high quality materials to resist impact. The OSHA standard nozzle is coated with a scratch guard to protect delicate surfaces...

 

OSHA compressed air blowguns

 

View more...


A great marketing asset, the packaging inserts are specially designed to showcase the safety couplings (SP20 plastic series) and nipples on the shelves of your shop, while ensuring efficient storage. With a 32.5mm centre-to-centre spacing, these inserts will fit perfectly on your shop's shelf pins...

 

Quick-connect safety couplings ISO-B - SENGA

View more...


Our new range of 400 series push-in fittings for misting expresses our expertise in the field of medium pressure connections (max 80 bar). The water, pressurised and channelled, is diffused by nozzles of different diameters in the form of micro-particles and will thus create a refreshing effect on the surface to be treated...

 

Push-in fittings for misting - SENGA

View more...


08th January:2020

SENfluid

SENfluid is a distribution system for compressed air designed in aluminium and reinforced resin. This piping system is characterised by its lightness and its assembly/disassembly without tools (simple Allen key), which makes it an efficient and economical solution for routing fluids (compressed air and neutral gases) to points of use while minimising drop pressure...

 

SENfluid : compressed air piping system

View more...


 

We offer a brand new range of ISO B profile safety couplings in our catalogue: anti-scratch design series (SP20) available in 5.5 and 8 mm passages (ISO 6150-B12 and ISO 6150-B15). Featuring an anti-whiplash (ISO 4414) and anti-scratch design, this new coupling is remarkably light and compact...

 

Anti-scratch design quick safety couplings ISO-B - SENGA

 

View more...


We offer a brand new range of ISO C profile safety couplings in our catalogue: anti-scratch design series (SP40)available in 5.5 and 8 mm passages (ISO 6150-C10 and ISO 6150-C14). Featuring an anti-whiplash (ISO 4414) and anti-scratch design, this new coupling is remarkably light and compact...


Anti-scratch design quick safety couplings ISO-C - SENGA

View more...


SENGA, a specialist in fittings and components for industrial pneumatics, announces its participation in the next SEPEM INDUSTRIES Sud-Ouest to be held in Toulouse from 26 to 28 March 2019. This 32nd edition of SEPEM (Services, Equipment, Process and Maintenance) will be the opportunity to present the new products added to our ranges: fittings, tubes and hoses, pneumatic components and workshop equipments...

 

SEPEM industry exibition in Toulouse - SENGA

 

View more...


In order to meet a growing demand from its customers and in a desire to constantly improve its services, SENGA has decided to keep a substantial stock of ISO 15552 cylinders (XT/M magnetic version)...

 

ISO 15 552 and CNOMO pneumatic cylinders - SENGA

View more...


In order to optimise the performance of your compressed air piping system and to work in the best conditions, it is essential to follow the following 6 basic rules:

  1. SET UP

  2. CHOOSE

  3. CONNECT

  4. PROVIDE

  5. INCLINE

  6. ARRANGE

How to optimize your compressed air piping system?View more...


The performance (energy efficiency) and lifespan of your compressed piping system depends heavily on the quality of the tubes used. To meet technical and economic requirements, the choice of aluminium tubes is essential. SENGA tubes (8300 series) are made of extruded aluminium alloy and painted to RAL 5012 and will meet your expectations in terms of both installation and performance...

 

Aluminium pipe for compressed air - SENGA

 

View more...


Located near Annecy, this family business specialises in fittings and couplings for compressed air, as well as tubes and components for pneumatics (cylinders, pneumatic valves and filtration). Its President, Patrice Bandera, explains to us how, in a difficult context of deindustrialisation in France, it has been able to maintain constant growth since its creation...


SENGA's anniversary : 40 years!

View more...

+20.000 articles     Guaranteed quality      Secure payment      Guaranteed delivery 24/72h      Technical/logistical advisors      After sales service

SENGA sas - Specialist in fittings and components for industrial pneumatics

 

SENGA SAS

  19, Route de la Salle
    ZAC des Romains Sud, Cran-Gevrier
    74960 ANNECY - FRANCE

Contact us 

Customer service +33 (0)4 50 57 18 07

Monday-Friday 8:30-12 am / 1:30-5 pm

Don't have an account yet? Register Now!

Sign in to your account