Discover the SENGA compressed air blowguns
The air blowgun is a gun that blows air under pressure and usually consists of a nozzle, a handle and a trigger. The blowgun is used in many sectors (mechanics, garage, DIY, industry) and especially in manufacturing and maintenance activities. Connected to the mains or to a compressed air supply (compressor), these tools are primarily used to remove dust, dry, and clean hard-to-reach cavities, and to clean from a great distance, while respecting the safety of the operators. There are a number of different blowgun nozzles depending on the application required: long, short, angled, silent etc... This makes it possible to adjust the blowing force, the noise level...
What are the main features of a compressed air blowguns?
-
- Air flow rate (consumption) and blowing force
-
- Noise level
-
- Type of nozzle (special, long, short, silent, anti-scratch, angled, Venturi)
-
- Progressive regulation of the air flow
-
- Working temperature
-
- Maximum working pressure
-
- Materials (aluminium, resin, acetalic anti-shock)
-
- Standards and directives: 2006/42/EC, EN 12100, OSHA Regulations, RoHS, REACH
-
- Ergonomics of the handle (soft-touch)
-
- Threaded (BSP) or spiral connection
The SENGA range
> The acetalic anti-shock blowgun type EUR 01
Technical data
Materials and components
- robust body made of impact-resistant acetal resin
- 1/4" cylindrical BSP threaded connection
- progressive air flow regulation air flow rate at 6 BAR: 320 l/min
- maximum working pressure: 12 BAR
- noise level: 85 dB
- working temperature: -5°C / +50°C
> Blowgun with silent nozzle EUR 01 SIL
Silent blowgun type EUR 01 with a special nozzle that reduces the noise level to 75 dB.
> The supply air unit type UNIT 10
Technical data
Materials and components
- 1 blowgun type EUR 01
- 1 polyurethane spiral hose with a useful length of 3.5 metres, diam. 5x8
- 2 swivel couplings with spring protection, 1/4" conical male
- 1 1/4" female coupling nipple, 5.5mm bore, profile ISO 6150 B-12
Air flow rate at 6 BAR: 250 l/min
- maximum working pressure: 10 BAR
- working temperature: -5°C / +50°C
> Blowgun type AIR04
Technical data
Materials and components
- aluminium body
- 1/4" cylindrical BSP threaded connection
Air flow rate at 6 BAR: 230 l/min
- maximum working pressure: 12 BAR
- working temperature: -20°C / +50°C
> The polymer blowgun
Technical data
Materials and components
- body made of polyamide 6 GK 30 reinforced with glass beads
- 1/4" female BSP threaded connection
- progressive air flow regulation
- equipped with a nut for nozzle replacement (M12 x 1.25)
Application range: filtered compressed air
- working pressure: 2 - 8 BAR (PMS: 10 BAR)
- noise level: see below
- working temperature: - 20°C / + 80°C
> Aluminium short-nozzle blowgun 8105
- - Blowgun with short nozzle, 1.5 mm bore, aluminium.
- - Noise level of 90 dB(A) for pressures above 4 bar.
- - Flow rate: 120 Nl/min at 6 BAR
- - Angled extension possible
> Angled nozzle blowgun 8106
- - Blowgun with angled nozzle L=110 mm, bore 2.3 mm, in galvanised steel.
- - Flow rate: 350 Nl/min at 6 BAR
- - Protective cap
> Blowstar 8107 Multi-Force Safety Blowgun
- - Short nozzle with solid cone in die-cast zinc, silent (<74 dB(A)) and safe (accidental contact with the skin).
- - Blowing force multiplied by 2.5 compared to a conventional short single-hole nozzle.
- - Flow rate: 300 Nl/min at 6 BAR
- - Complies with Machinery Directive 2006/42/EC, EN 12100 and OSHA Regulations.
> Safetystar 8108 safety blowgun
- - Nickel-plated steel star nozzle, L = 120 mm, silent (<80 dB(A)) and safe (accidental contact with the skin).
- - Flow rate: 250 Nl/min at 6 BAR
- - Complies with Machinery Directive 2006/42/EC, EN 12100 and OSHA Regulations.
Anti-scratch Nozzle blowgun 8109
The 8109 13 42 anti-scratch nozzle blowgun is made of high quality materials.
The ergonomic soft-touch handle ensures a high level of comfort and allows the user to work longer, reducing the risk of injury caused by repetitive work. repetitive work.
The blowgun is equipped with a progressive control valve to allow precise regulation and control of the airflow. There are many applications in the various industrial sectors using compressed air for cleaning.
Field of application: filtered compressed air in industry, garages, body shops
- Maximum working pressure: 16 BAR
- Working temperature: -20°C / +60°C
- Air flow rate at 6 BAR: 415 l/min
- Noise level at 6 BAR : 82 dB(A)
- Angled nozzle L = 130 mm
- Brass insert connection with 1/4" female BSP thread
- Progressive air flow regulation
Nickel plated brass air blowgun
Technical data
Materials and components
- nickel-plated brass body
- stainless steel nozzle
- 1/4" cylindrical BSP threaded connection
- progressive air flow regulation
- equipped with a nut for nozzle change
Air flow rate at 6 BAR: 450 Nl/min (325L)
Field of application: compressed air
- maximum working pressure: 10 BAR
- noise level (LAeq): 88 dBA at 6 BAR
- working temperature: -10°C / +80°C
> Standard blowgun 325L
> Safety blowgun with air screen 326L
