1/4" regulator for 0-8 bar battery
Product N° 042-01-00047
1~2 weeks, delivery from €15
Helpful information:
Filters, regulators, filter-regulators, lubricators, pneumatic soft starters, 3-way shut-off valve, solenoid shut-off valve - 042 Series
Recommended for the treatment of compressed air and non-corrosive liquids, the 042 series modular devices are available in different products: 3-way shut-off valve, filter, regulator, filter-regulator, solenoid shut-off valve, soft starter, standard lubricator, vacuum filling lubricator...
- Characterized by a double assembly system, our modular units are practical, functional and have a very small footprint. They can be assembled in standard combined units such as FR+L, V+FR+L, F+R+L, F+L, using standard unit assembly kits.
- Made of high quality polymer, these modular units have a G1/4" connection.
- Resistant to solvents and hydrocarbons
- Use for compressed air and non-corrosive liquids
- Built-in relieving
- Materials: High quality polymer
- 3-way shut-off valve (V 042-25)
- Filter (F 042-02)
- Regulator (R 042-01)
- Filter-regulator (FR 042-04)
- Solenoid valve of sectioning (E 042-26)
- Soft starter (D 042-27)
- Standard lubricator (L 042-03)
- Vacuum filling lubricator (L 042-03VL)
- Used to cut off the air supply and at the same time to discharge the downstream circuit.
- The blocking device is particularly useful during maintenance operations. It prevents the unauthorized pressurization of the system.
- Possibility of wall mounting using the holes provided.
- Discharge connection: 1/8" BSP female thread.
- Maximum inlet pressure: 16 bar = 230 Psi = 1,60 MPa.
- Temperature range: 5° to 50° C.
- The device is delivered with a padlock.
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 1570 Nl/min.
- Weight : 0,155 Kg. - Very good condensation separation.
- Low pressure drop.
- Provided with holes for wall mounting.
- Standard filtration degree of 20 microns (on request 5 microns).
- Manual and semi-automatic condensate draining device in the standard integrated version (SS) or automatic with float (SA).
- Transparent polyamide bucket with reinforced resistance.
- Quantity of condensation recovered: 22 cm3.
- Maximum operating pressure: 16 bar = 230 Psi = 1.60 MPa.
- Temperature range: 5 to 50°C (41 to 122°F).
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 1250 Nl/min.
- Weight : 0,100 Kg. - Modular series with reduced dimensions.
- Membrane operation.
- Provided with holes for wall or bracket mounting.
- Knob with regulation locking device. On request: padlockable version.
- Built-in automatic pressure release (relieving).
- Pressure gauge connection: female thread 1/8" BSP.
- Adjustment range: 0 ÷ 4 bar, 0 ÷ 8 bar (standard), 0 ÷ 12,5 bar.
- Maximum inlet pressure: 16 bar = 230 Psi = 1,60 MPa.
- Temperature range: from 5° to 50° C.
- Reference flow rate (P = 6,3 bar - Δp = 1 bar): 1200 Nl/min.
- Weight : 0,125 Kg. - Membrane operation.
- Provided with holes for wall or bracket mounting.
- Knob with regulation locking device. On request: padlockable version
- Built-in automatic pressure release (relieving).
- Pressure gauge connection: 1/8" BSP female thread.
- Very good condensation separation.
- Adjustment range: 0 ÷ 4 bar, 0 ÷ 8 bar (standard), 0 ÷ 12,5 bar.
- Standard filtration degree of 20 microns (on request 5 microns).
- Manual and semi-automatic condensate draining device in the standard integrated (SS) or automatic float (SA) version.
- Other functional characteristics identical to the filter.
- Reference flow rate (P = 6.3 bar - Δp = 1 bar): 1200 Nl/min.
- Weight: 0,160 Kg. - Device allowing to cut off the power supply and at the same time to unload the downstream circuit by means of a remotely operated electro-pneumatic or pneumatic control.
- Available with CNOMO (standard) or MICROSOL control.
- Electrical voltage: 24V DC (standard), 24V AC or 220V AC.
- Available on request with pneumatic control.
- Possibility of wall mounting using the holes provided.
- Discharge connection: 1/8" BSP female thread.
- Minimum allowable pressure: 3 bar = 40 Psi = 0.3 MPa.
- Maximum working pressure: 10 bar = 145 Psi = 1 MPa.
- Temperature range: 5° to 50° C.
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 1570 Nl/min.
- Weight : 0,189 Kg. - Gradual pressurization of the system up to operating pressure.
- Before the maximum available pressure is released, air is slowly introduced into the downstream circuit until 60% of the upstream pressure is reached.
- The flow regulator can be used to adjust the pressure build-up time.
- Possibility of wall mounting using the holes provided.
- Minimum allowable pressure: 3 bar = 40 Psi = 0.3 MPa.
- Maximum operating pressure: 10 bar = 145 Psi = 1 MPa.
- Temperature range: 5° to 50° C.
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 1570 Nl/min.
- Weight : 0,136 Kg. - Proportional oil mist type.
- Constant lubrication over time.
- Guaranteed operation even at low flow rates.
- Fine adjustment of the quantity of lubricant.
- 360° drip display.
- Oil filling plug.
- Provided with holes for wall mounting.
- Transparent polyamide cup with reinforced resistance, capacity 42 cm3.
- Recommended oil viscosity: ISO VG32 standard.
- Maximum working pressure : 16 bar = 230 Psi = 1,60 MPa.
- Temperature range: 5° to 50° C (41° to 122° F).
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 2060 Nl/min.
- Weight : 0,100Kg. - Indispensable when you want to load the oil quickly and safely without interrupting the normal operation of the system.
- Filling is controlled by holding down the button on the base of the grease gun body. This causes a vacuum inside the bowl, which allows the oil to be sucked in.
- The flow stops only when the button is released.
- The oil level must be checked visually.
- Minimum activation pressure: 3 bar = 40 Psi = 0,3 MPa.
- Other functional characteristics as for the standard model.
- Reference flow rate (P = 10 bar - Δp = 1 bar) : 2060 Nl/min.
- Weight : 0,140 Kg.
